JETI model s.r.o.

Receivers Rx

The system is continuously improved. Thanks to online updates the improvements are easily accessible to users from any part of the world. From the very beginning bidirectional transmission has been a distinctive feature of the Duplex system, this not only handles telemetry data, but it also helps to ensure secure primarily transmission safety between the transmitter and receiver.
 

The Duplex EX telemetry system uses an open protocol. This gives the advantage of compatibility with a large number of telemetry sensors from both JETI model and third party producers. For the display of telemetry data you can use purposely designed equipment like the JETIBOX profi and DC/DS transmitters or you can display the data on PCs.

The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch.
An additional satellite receiver RSat2 complements the receivers R9,  R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system.

  • DUPLEX EX R7 nano

    Receiver DUPLEX R7 nano EX combines many servo outputs together with small dimensions. R7 nano EX is designed for easy use in small models. The receiver incorporates a single 32mm antenna.

    R7 nano…

  • DUPLEX EX R14

    14 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply is provided by MPX connector or standard JR connectors.

    Additional features…

  • DUPLEX EX R18 + DRsat

    18 channel receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply is provided by MPX connector or standard JR connectors.

    Additional features:

    • PPM…
  • DUPLEX EX R4RES

    R4 RES receiver has a special type of firmware designed for the competition category of electrically powered gliders (ERES).
    Measurements and height calculations are the same as the specifications…

  • DUPLEX EX R5 L

    5 channel receiver compatible with JETI EX & EX Bus protocols. This receiver is designed for operation in small and medium models. Supports telemetry functions. Power supply can be provided by any of…

  • DUPLEX EX R9

    9 channel receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

    Additional features:

    • PPM input…
  • DUPLEX EX Rsat 2

    Rsat2 satellite receiver for use with other JETI model products.

    PPM output is available on a single line.