Short stick for DS series transmitters.
Long controller stick with potentiometer.
Metal pads for stable and vertical position of the transmitter.
Back Metal Cover for DS 16/14
Tray for DS-12 transmitters, glossy black surface.
Tray for DS series transmitters (except DS-12), black glossy finish.
Tray for DS series transmitters (except DS-12), matt blue finish.
Car socket charging adapter for Duplex transmitters (except DC/DS-24II).
Long controller stick with button.
Long controller stick with three-position switch.
Silver nut for securing the switches on the front panel of the DC series transmitter.
Foldable transmitter brackets for stable suspension without the use of a tray.
DS 24- Black nuts for upper switches - Front panel
Push button for mounting in place of the switch for DS series transmitters.
Two position switch with mechanical position lock for DS series transmitters.
Two position switch with long stick for DS series transmitters.
Three-position switch with long stick for DS series transmitters.
Three-position switch with long stick that returns to the center position for DS series transmitters.
Two-position switch with long stick that returns to the upper position for DS series transmitters.
Three-position switch with long stick that returns to the lower position for DS series transmitters.
Three-position switch with long stick that returns to the upper position for DS series transmitters.
Two-position switch with short stick for DS series transmitters.
Three-position switch with short stick for DS series transmitters.
Black nut for securing switches on the front panel of DS series transmitters (2pcs).
Black nut for securing switches on the frame of DS series transmitters (2 pieces).
Silver nut for securing switches on the frame of DS series transmitters (2 pieces).
Silver nut for securing switches on the front panel of DS series transmitters (2 pieces).
The cover contains an MSW module and a button suitable for the F3K category. Up to five additional buttons or switches can be connected to the module.
Silver aluminium case with foam inserts for DS series transmitters.
• Duplex backpack for various uses • The possibility of connection with the new DUPLEX bag
• DUPLEX bag for various uses • Adapted for use with DS transmitters
DUPLEX TX pad underlay
Set of extended potentiometer levers on the side of the frame. (both sides)
Set of extended potentiometer slide levers facing up. Allows accessibility of the side potentiometers when the DS transmitter is in the tray.
Replaceable set of springs with higher stiffness for cross controllers.
Tray holder for attaching the transmitter and increasing the stability of the transmitter mounting.
Key for dismounting and replacing switches on the transmitter housing.
Neck strap for hanging DS series transmitters.
Plastic pads for stable and vertical positioning of the transmitter.
Plug for empty slot after the switch (5 pieces).
Spare accumulator for Duplex transmitters.
Cable for outputting the PPM signal to the front panel of the transmitter.
Cable for outputting the PPM signal to the front panel of the transmitter. Stereo for Phoenix simulator.
Set of screws for securing the rear cover of DS series transmitters (except DS-12).
Set of screws for securing the rear cover of the DS-12 transmitter.
A pair of spare side knobs.
Silver aluminum case with foam inserts for DS series transmitters.
Long controller stick with two-position switch.
is designed for DC/DS 24II transmitters. This module allows to connect up to six separate controls as switches or potentiometers. The TX-MSW module is installed directly into the transmitter on the ma...
Transmitter expansion module for six buttons or switches for DC/DS transmitters.
Cover to protect your hands and transmitter from cold and rainy weather.
Tray for DS-12 transmitters.
Data and charging cable for Duplex DC/DS-24II transmitters. Length 1.5m.
Data cable for Duplex transmitters (except DC/DS24II).
