LMR (Limited Motor Run) - the controller is especially designed for lowest possible weight. This series is not in a metal box and is intended primarily for glider models where continuous motor run…
MEZON EVO 50 BEC controllers have an aluminum box which helps with efficient cooling. MEZON EVO 50 BEC is a completely universal controller for models of airplanes, helicopters, ships and vehicles…
*LMR (Limited Motor Run) - the controller is especially designed for lowest possible weight. This series is not in a metal box and is intended primarily for glider models where continuous motor run…
MEZON EVO 80 BEC controllers have an aluminum box which helps with efficient cooling. MEZON EVO 80 BEC is a completely universal controller for models of airplanes, helicopters, ships and vehicles…
MEZON EVO 85 OPTO controllers have an aluminum box which helps with efficient cooling. MEZON EVO 85 OPTO is a completely universal controller for models of airplanes, helicopters, ships and vehicles…
SB: Switching BEC. HS: High Speed. Suitable for high RPM motors.
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as…
SPIN pro controller include a new type of voltage stabilizer for receiver and servos, the so called switching BEC with an output voltage of 5.5 V. The use of this feature opens the way to the use of…
Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3…
The SPIN Pro 165 OPTO controller is intended for controlling BLDC motors. The parameters of the controller can be set by JETI BOX. The controller can be set up in three mode: normal (aircraft),…
ddCAP 1640 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your…
ddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your…
nti Spark connectors are designed for connection between the drive battery and the controller of electric motors. These connectors are equipped with a circuit to limit the charging current to the…
JETIBOX is a universal communication terminal which can be used with any JETI products that are marked JETIBOX Compatible. JETIBOX Compatible (JBC) products use powerful software to allow easy setup…
The USB Adapter transfers information between a PC and Jeti model products. It is, in fact, an adaptation means between the PC USB interface and the data connector Ext. with appropriate USB support,…
