JETI model s.r.o.

Voltage regulators BEC

  • Max Bec

    Linear regulator MAX BEC is a sophisticated tool for regulating voltage in models which have a receiver and servos powered by 2 LiXX cells or 5-6 NiXX cells. Servo voltage is constant during the…

  • Max Bec 2

    MAX BEC 2 is designed to power the receiver and servos in the model. MAX BEC 2 is a linear voltage stabilizer with an adjustable output voltage. The output voltage is set using a jumper and in one of…

  • Max Bec2D plus

    Manufactured according to very high European standards, the MAX BEC 2D plus EX is the latest dual input, linear voltage regulator from JETI. The Max BEC 2D Plus EX includes a magnetic switch, so…

  • SINGLE BEC

    SingleBEC is a linear regulator to provide power for a standard servo with a maximum input voltage of 6V. The SingleBEC can also be used to provide power for the control units of helicopters or…

  • S BEC

    The switching voltage regulator SBEC is supposed to act as a current supply for receivers and servos. It makes possible to use a wide range of input voltages from 2S up to 10S Li-XX cells. Setup of…

  • S BEC 30 D EX

    The switching voltage regulator SBEC 30D EX is supposed to function as a current supply for receivers and servos. It enables to use a wide range of input voltages from 2S up to 15S Li-XX cells. Setup…

  • Magnetic key

    Replacement magnetic key for electronic switches from JETI model s.r.o.

  • Magnetic Switch

    The Magnetic switch is an electronic switching device designed to be used as a switch for JETI model products. A big advantage of electronic switches in comparison to mechanical switches is that, in…

  • Redukce MPX/3xJR

    Increaser MPX male / 3x JR conector for MAX BEC 2. Conductor cross section 0.5 mm2.