Mini Guide - Transmitter
The instructions are prepared as a common guide for all types of DC/DS JETI Duplex transmitters. The transmitters may have different graphics but contain the same content. For DS-12, DC/DS-14, DC/DS-14II, and DC/DS-16II transmitters, some described functions may only be available after purchase on the manufacturer’s website: https://swshop.jetimodel.com/
Dual/Expo Rates, Function curves, Aileron Differential, Ailevator
ual/Expo Rates (Menu/Fine Tuning/Dual Rate/Exponential) The adjustment of control surface deflection size or setting of exponential response curves is done in the common transmitter menu. On the menu’s main screen, the current status for each output is displayed along with…
Flight Modes, Digital Trim, Flight Mode Trims
Flight Modes (Menu/Fine Tuning/Flight Modes) The Flight Modes application allows for various model settings (control surfaces, lighting, auxiliary functions, telemetry-based responses, etc.) and different responses of the model to transmitter stick movements (expo, curves, deflection…
Function assignment, servo setup, device explorer
Function Assignment (Menu -> Model -> Function Assignment) After creating a new model using the “Basic Configuration” wizard, a list of control functions is automatically generated. These functions can be freely edited or expanded within the Function Parameters menu. Available options…
Creating a New Model
escription of the Sample Model Being Created: Motorized aircraft with a single electric motor and flaps, such as the Cessna 150 Fixed landing gear with a steerable nose wheel Equipped with digital HV servos Functions: 2x ailerons, 2x flaps, 1x rudder, 1x elevator, 1x nose wheel…
DUPLEX transmitters
Interactive Help All Duplex transmitters are equipped with an interactive help function. Whenever a question mark icon appears in the top left corner of the menu, pressing the "MENU" button will bring up the relevant help section. Tip: At the end of each help section, an active…