JETI model s.r.o.

MEZON EVO 85 OPTO

Description

MEZON EVO 85 OPTO controllers have an aluminum box which helps with efficient cooling.
MEZON EVO 85 OPTO is a completely universal controller for models of airplanes, helicopters, ships and vehicles for users not only of JETI Duplex transmitters, but also of other RC systems.

Features
    • full EX telemetry (voltage, current, capacity, revolution etc.)
    • setup of device through EX Bus communication from JETI Duplex transmitter
    • accurate governor and full support of helicopter models
    • F3A mode for acrobatic planes
    • adjustable brake with back energy recovering into accumulator
    • optically separate input
    • wide range of supply voltage 2 - 12 Lixx (max. 51V)
    • bidirectional motor run is possible
    • active proportional brake
    • effective cooling
    • compact dimensions
    • user-friendly wizard for quick setup of the controller ("Quick Setup mode")
    • in "Expert mode" access to all controller programming options

Parameters

Box Aluminum
Weight [g] 83
Dimensions [mm] 28 x 20 x 85
Sustained current [A] 85
Supply Voltage [V] 6 to 51
Batteries LiXX 2 to 12
Max. Current BEC [A] -
OPTO (optically separated radio signal from the power management) Yes
Average Current BEC [A] -
Peak Current BEC 1s [A] -
Voltage BEC [V] -
Telemetry Yes
Operational temperature [°C] -10 to 85
Resistance in conducting state [mΩ] 1.2
Cable crossection (input/output) [mm²] 4 / 2.5

Downloads

Instructions for the basic settings of MEZON EVO - Czech

MEZON-EVO-quick-manual-CZ

Instructions for the basic settings of MEZON EVO - Germany

MEZON-EVO-quick-manual-DE

Instructions for the basic settings of MEZON EVO - English

MEZON-EVO-quick-manual-EN

Instructions for the basic settings of MEZON EVO - France

MEZON-EVO-quick-manual-FR

Full manual for MEZON EVO - Czech

Full manual for MEZON EVO - CZ

Full manual for MEZON EVO - English

Full manual for MEZON EVO - EN