DC-16 - Silverk nuts for upper switches - Front panel
Holder for transmitter DC-16/24, DS-14/16/24
DS 24- Black nuts for upper switches - Front panel
Extended side lever of the DS16 / 24 potentiometer
Extended side potentiometer lever for DS-16 transmitter, Left and Right.
Power Supply 12V for DC/DS - Universal
The AddCAP 10AS is an add-on capacitor unit that helps to insure constant voltage for your servos and receiver in large pulse current consumption power systems.
JETIBOX is a universal communication terminal which can be used with any JETI products that are marked JETIBOX Compatible. JETIBOX Compatible (JBC) products use powerful software to allow easy setup…
The JETIBOX mini is used for data readout and parameter adjustment of hooked up equipment. Due to small size it can be easily mounted to the transmitter and its clearly arranged backlit display…
The JETIBOX profi is a mobile wireless device, offering maximum comfort to the user while viewing, processing, and storing telemetric data. An integral part of the JETIBOX profi is the system…
The USB Adapter transfers information between a PC and Jeti model products. It is, in fact, an adaptation means between the PC USB interface and the data connector Ext. with appropriate USB support,…
Replacement antenna for TU2 transmitter modules of the DUPLEX 2.4 GHz system.
Cable for connecting the DUPLEX TU module with the transmitter.
Replacement cable for JETIBOX.
Clip for Jetibox
Mounting kit for installation of the DUPLEX TU2 transmitter module in Futaba FC-16 and FC-18 transmitters.
Mounting kit for installing the DUPLEX TU2 transmitter module in the Graupner MC-19 transmitter.
Mounting kit for connecting an external siren and headphone output to the DUPLEX TU2.
Mounting kit for mounting the Duplex TU2 transmitter module for switching between two modules.
Mounting kit for installing the DUPLEX TU2 transmitter module in Graupner MC-10 and MC-12 transmitters.
Mounting kit for installing the DUPLEX TU2 transmitter module in Graupner MX-16s and MX-12s transmitters.
Mounting kit for installing the DUPLEX TU transmitter module in the Hitec Eclipse 7 transmitter.
Mounting kit for installation of the DUPLEX TU2 transmitter module in Multiplex EVO transmitters.
The Magnetic switch is an electronic switching device designed to be used as a switch for JETI model products. A big advantage of electronic switches in comparison to mechanical switches is that, in…
Rsat2 satellite receiver for use with other JETI model products. PPM output is available on a single line.
ackup receiver compatible with JETI EX 900 & EX Bus protocols. Supports telemetry functions. Additional features: PPM input PPM output Integrated expander for EX & EX Bus devices UDI…
Replacement magnetic key for electronic switches from JETI model s.r.o.
RCSW - RC Switch is a wireless switch designed especially for JETI model products (BEC stabilizers, Central Box and other accessories) that increase the comfort of model control. RC Switch can be…
The Expander SW4 is an extension for magnetic and RC switches and is designed for switching multiple devices simultaneously. The JETI model company produces a wide range of devices that can be…
Increaser MPX male / 3x JR conector for MAX BEC 2. Conductor cross section 0.5 mm2.
ddCAP 1640 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your…
ddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your…
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as…
nti Spark connectors are designed for connection between the drive battery and the controller of electric motors. These connectors are equipped with a circuit to limit the charging current to the…