Transmitter Duplex DS-16 II.- Carbon Line Light Yellow

Art. No.:
JDEX-TDS16II-CLLY-AU

Beschreibung

Parameter

Downloads

Module

Beschreibung

They retain all the functionality of the first generation.

In addition, they have:

• color display
• support MP3 files
• internal microphone
• voice commands (as an extension)
• back-up RF 900MHz NG module (as an extension)

Parameter

Gewicht [g]	1500
Alukoffer	Ja
Senderakku [mAh]	6200
Displaygröße	3.5
interne SD-Karte	8 GB
Hallsensoren Steuerknüppel/Vibration	Ja / Nein
Auflösung der Steuerknüppel	4096
Transmitter Frame	Aluminum
Material der Steuerknüppelmechanik	Aluminum
Anzahl der Sendeantenne 2.4GHz/900MHz	4 / 1
Abmessungen [mm]	230x270x40
Ausgangsleistung - 2,4GHz [mW]	100
Einsatztemperatur [°C]	- 10 bis 60
Kanäle	24
Control Inputs (Stick/Switch/Knob)	18
Backup Module 900MHz	upgradable
Flugphasen	10
freie Mischer	20 (bis 25)
graphische Darstellung der Telemetriedaten	Active
Audio Player	Active
logische Schalter	16 (bis 24)
Number of Remote Commands	16 (bis 24)
Sequenzer	6 (bis 10)
Timer	10
Datenfenster im Display	40
Sound bei Ereignis	20 (bis 30)
Alarme	40
Vibrationsalarm in den Steuerknüppeln	Nein
Voice Output	Active
MP3	Active
Mikrophon	Active
Gyroeinstellungen	3
Servobalancer	Active
Funktionskurven	Active
Throttle Limiter (heli)	Active
Vario	Active
Flugphasentrimmung	Active
Data Stream Logging	80
Telemetriegeber	8
Voice Commands	0 (bis 15)
Lua Apps	10
Ditex Servo Telemetry	16
Double Path	Active
Beschleunigungssensoren	Nein
HF-Module 2.4GHz/900MHz HG	2 / 1 (next generation) 863 - 870 MHz (EU), 902 - 928 MHz (US)
Control Inputs (Stick/Switch/Knob)	18

Downloads

Manual for Duplex Transmitters DC/DS-16II - "Basic setting" - English

DC-DS-16II-EN-2023-04-web.pdf

Manual for Duplex Transmitters DC/DS-16II - "Basic setting" - German

DC-DS-16II-DE-2023-04-web.pdf

Manual for Duplex Transmitters DC/DS-16II - "Basic setting" - Czech

DC-DS-16II-CZ-2023-04-web.pdf

Manual for Duplex transmitters - "Main menu" - Czech

DC-DS-CZ-2021-04-MainMenu-web.pdf

Manual for Duplex transmitters - "Main menu" - Germany

DC/DS-DE-2021-04-MainMenu-web.pdf

Manual for transmitter - "Main menu" - English

DC-DS-EN-2021-04-MainMenu-web.pdf

Overview of transmitter accessories and their compatibility - april-2024-CZ

Overview of transmitter accessories and their compatibility - april-2024-DE

Overview of transmitter accessories and their compatibility - april-2024-EN

Module

Voice Commands up to 16

VF modul 900MHz

Enables the NG back-up transmitter module in the 900MHz NG (Next Generation) band. The DS-12 transmitters feature a backup wireless system for high data transmission safety and reliability.

Free Mixes up to 25

Increases the number of free mixes from 5 to 20. Configuration of free mixes is carried out in Fine Tuning › Free Mixes.

Logicswitches up to 24

Enables the function of 16 logical switches that determine their output according to the position of up to two assigned controls. You can also assign the output of each logical switch as the input of any model function. This way it is possible to create several virtual controls very easily that can be used to control the securing of landing gear, start timers or the activation of aerodynamic brakes. The configuration is available in Advanced Properties › Logical Switches.

Number of remote commands up to 24

Activation of 16 control commands for controlling devices connected via EX Bus. By the simple move of a switch on the transmitter it is possible e.g. to delete maximums and minimums recorded in the Central Box after each flight. The control commands can be understood as extra channels for additional functions of the model. The summary of active commands is to be found in Model › Device Explorer.

Sequencer up to 10

Activation of up to 6 user adjustable sequences. The start is carried out via an assigned control. Using the sequencer, you can easily achieve realistic landing gear retraction in scale models, in addition it is possible to control periodic events, such as position lights blinking. Setting the sequences is possible in Advanced Properties › Sequencer.

Sprachausgabe / Ereignis bis zu 30

Erweitert die maximale Anzahl der programmierbaren Sprachausgaben zu bestimmten Ereignissen von 5 auf 10. Damit können Sie eine Ansage einem Schalter zuordnen. So ertönt z.B. “Fahrwerk ausgefahren” bei Betätigung des Fahrwerksschalters. Erweiterte Einstellungen › Sprachausgabe/Ereignis.