JETI model s.r.o.

Receiver batteries

For the production of Power Ion accumulators we use strictly branded Sony-Murata Li-Ion batteries (accumulators). Individual battery cells are sorted and selected before assembly according to strict criterias. This ensures high reliability and long accumulator life even when charging without balancing. All available Power Ion accumulators cell types have a maximum charging voltage of 4. 2V per cell.

The following cell types are used for the production of the Power Ion accumulators:

Cell type

Power Ion
2600A 

Power Ion
3100

Capacity [Ah] 

2,6  3,1

Max. charge current [A]

4 4

Max. discharge current continuous [A]

30 20

Max. discharge current peak [A] 

60 40

Weight [g] 

47 46,5

Internal resistance [mΩ]

10 12,8

 

Receiver accumulators Power Ion RB are assembled from suitably selected Power Ion 2600 or Power Ion 3100 type cells. The mechanical durability of the accumulators is enhanced by plastic covers and protective foil. The length of the output cables is 14 cm. The cable terminated with a servo connector is used to charge the accumulator or to monitor its condition. The power cable has a diameter of 1.5 mm, it is terminated with an MPX connector and is designed to power the receiver and other devices.

The accumulators are delivered in a plastic mounting pad with velcro fastener.
The rubber grommets of the pad reduce transmission of vibration.