- New Products
- Duplex 2.4 EX
- Speed Controllers
- Central Box
- FM Receivers
- Duplex Clothes
- Discontinued products
In answer to our customers´ inquiries we would like to respond to the fact that the two-year transitional period of the standards relating to electromagnetic compatibility at a frequency of 2.4 GHz is terminating.
The EN 300 328 v1.7.1 standard is valid only until the end of 2014 and since 1. 1. 2015 it will be fully replaced by the EN 300 328 v1.8.1 standard.
New products from our catalogue should arrive at the market during the following days. These products have passed careful development and testing:
An electronic switch for the power battery inside the model.
Duplex R7 nano:
The smallest Duplex receiver with the weight of 1g.
Advance 10 Pro:
A lightweight controller without BEC for indoor models.
An airspeed sensor up to 450km/h.
MAX BEC 2D Plus:
Voltage regulator with the support of RC Switch.
EnLink 2RS Plus:
An intelligent signal merger for servos and PPM.
|Power Output [mW]||100|
|Number of channels||16|
|Number of controls||18|
|Operational temperature [°C]||-10 ... 60|
|Operating time [h]||11|
|Compatible protocols||DUPLEX 2.4GHz EX, EX Bus|
Files for download
Manuals - DC/DS Transmitters
Declaration of Conformity: DS-16, DS-14
Thumb-style variant of the top-class RC transmitter of JETI model. The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts. The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy. Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.
DC-16 and DS-16 transmitters have the same software possibilities, besides, the thumstyle variant has a built-in tri-axis accelerometer with gyroscope, via which it is possible to control extra functions of the model.
|JDEX-TDS16-M1||Transmitter mode 1/3|
|JDEX-TDS16-M2||Transmitter mode 2/4|
|JDEX-TDS16-M5||Special mode with both spring loaded control sticks|
A backlit LCD display placed on the top side of the transmitter offers perfect legibility at any lighting condition and a large surveillance angle. Thanks to the high display resolution and application of a relatively big ammount of graphic images it was possible to create a simple and intuitive setting procedure, especially for displaying telemetric data.
The DUPLEX EX product family has been equipped with an improved telemetric data transfer system and the subsequent data processing on the LCD transmitter display or analysis on a PC. The transmitter allows setup of acoustical notifications (optionally created by the user himself), which are related to the actual telemetric values or to sound signals assigned to conditions of particular control elements.
Duplex 2,4GHz – for flight control and reception of telemetric data from the model to the transmitter the DS-16 takes advantage of the wireless system Duplex 2,4GHz, which has been developed by the JETI model company as well. The data transfer system Duplex 2,4GHz is very reliable and has been verified during many years.
LCD Display – the 3,8“ backlit display of the DS-16 transmitter with a resolution of 320x240 pixels allows perfect legibility under all lighting conditions.
Li-Ion Battery – a reliable energy source with high capacity and long service life.
Easy Charging – simply done by connecting the mains adapter to the transmitter. The charging proces is shown in the DS-16 display.
Integrated Antenna – the antenna forms an integral part of the transmitter and is protected against mechanical damage.