

The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.
MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions.

Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:
Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.
Duplex REX V1.12
With EX Bus backup and signal forwarding.
All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).
MEZON 70 PRO LMR
Weight [g] | 85 |
Dimensions [mm] | 26 x 18 x 83 |
Sustained current [A] | 70 |
Peak current (max 30s) [A] | 70 |
Telemetry | Yes |
Operational temperature [°C] | -10 ... 85 |
Supply Voltage [V] | 6 ... 51 |
Batteries LiXX | 2 ... 12 |
Max. Current BEC [A] | 15 |
Voltage BEC [V] | 5 ... 8.4 |
Resistance in conducting state [mΩ] | 2 x 0.475 |
Cable crossection (input/output) [mm²] | 4.0 / 2.5 |
Files for download
Manuals - MEZON PRO
Update - MEZON PRO
Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.
LMR (Limited Motor Run) - the controller is especially designed for glider models. The continuous motor run is limited to a few seconds.
In addition, the throttle channel can optionally be connected to the receiver "EX Bus" port. A separate output pin for a throttle channel is therefore not necessary at the receiver, telemetry and control signals are transferred in both ways via just a single cable.
Properties
- Compact size
- Setting via the Device Explorer of the JETI DC / DS transmitter
- Real-time telemetry via JETI Duplex EX Bus (perfect for JETI DC / DS transmitters)
- Telemetry data: battery voltage, battery current + BEC current, used battery capacity, RPM, PWM, controller temperature
- Telemetry data reset by any transmitter switch
- Powerful BEC, ideal when using JETI Assist or other gyro systems in a model
- BEC with a wide input voltage range and adjustable output voltage
- Activation of the throttle channel from the EX Bus is possible; the receiver then does not have to offer its own slot for the throttle channel.
- Programmable with JETBOX
- Operating modes: Model aircraft, forward / reverse operation
- Proportional brake with a definable braking point at the throttle stick
- F3A brake conveniently adjustable via the Device Explorer
- Heat sink for long engine run times
- High efficiency
- Firmware upgrade possible
- Wide range of adjustable parameters
Recommended connection of the MEZON PRO controller (EX Bus):
Recommended connection of the MEZON PRO controller (standard):