rss
RSS
csende
Search
News
MEZON PRO now available
Image
 

The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.

MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions. 

Available products

REX V1.12 & REX Assist V1.10
Image
 

Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:

Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.

 

Duplex REX V1.12
With EX Bus backup and signal forwarding.

Download here

All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).

 

Download JETI Studio

 

 

Big March Update is here
Image
 

Lots of new features have been included in the latest updates for transmitters, receivers and JETI Studio PC software:

JETI Studio V1.1.0
It comes with new Transmitter wizard, Lua apps manager and automatic updates of the transmitters.

Download JETI Studio

DC/DS Firmware update V4.27

Update your transmitter to the latest version directly from JETI Studio. New transmitter features:
- DITEX telemetry support
- Updated vario settings
- New voice announcements...

 

Duplex REX V1.10
With DITEX telemetry support. All updates can be handled easily by JETI Studio.

DITEX: Telemetry Update Process

 

 

AC Speed Controllers

 
The speed controllers are available in 2 main types; for brushed motors (DC – commutator) and for brushless motors BLDC. Other factors in the selection of the controller are the voltage range of the drive batteries, current demands of the motor, and the  method used to power the receiver and servos. Jeti speed controllers normally provide thermal protection, protection of the battery against low voltage (LVC), and over current protection. BEC (Battery Eliminator Circuit) controllers include an integrated circuit to provide a stabilized power supply to power the receiver and servos.

Controllers that do not have BEC are marked OPTO, and require the use of a receiver battery (4 or 5 x NiXX), or an external BEC (Jeti MAX BEC is recommended for use with up to 12 cell NiXX, 3S LiPo, or 4S A123). OPTO controllers are designed to provide complete electrical isolation of the power supply from the radio system. OPTO controllers are recommended when BEC circuits are not sufficient for your needs because of a high servo count, the use of digital servos, or for models with high current consumption or high operating voltage.

Individual lines of controllers

Application

Types according to

current [A]

Types according to

voltage [V]

BEC

Parameter adjustment possibilities

Telemetry

ECO

Beginners

12 - 25

5 - 16

linear

Jumper

No

ADVANCE

Advanced

4 - 90

5 - 42

linear

Prog Card

No

HiCOPTER

Multicopter

30 - 90

5 - 42

-

-

No

MASTER

Specials for Hacker

4 - 195

5 - 42

linear

Prog Box

No

SPIN

Demanding applications

11 - 200

5-59

switching

JETIBOX

JETIBOX

MEZON

High power airplanes and helis

75 - 165

6-59

switching

JETIBOX

JETIBOX, EX

MEZON PRO

High power airplanes (hotliner)

40 - 80

5 - 51

switching

JETIBOX / JETI transmitters

JETIBOX, EX Bus

 
 
Ordering type
Show

Advance 10 Pro

Art. No.: JA-10-P
Advance 10 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 12 Pro

Art. No.: JA-12-P-P
Advance 12 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 30 Pro SB

Art. No.: JA-30-P-P-SB
Advance 30 Pro SB

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

Switching BEC.

 

Advance 40 Pro opto

Art. No.: JA-40-P-P-O
Advance 40 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 40 Pro SB HS

Art. No.: JA-40-P-P-SB-HS
Advance 40 Pro SB HS

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

SB: Switching BEC.

HS: High Speed. Suitable for high RPM motors.

 

Advance 70 Pro opto

Art. No.: JA-70-P-P-O
Advance 70 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 70 Pro SB HS

Art. No.: JA-70-P-P-SB-HS
Advance 70 Pro SB HS

The Advance controllers will fully comply with all requirements of the user and in connection with the programming card, they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

SB: Switching BEC.

HS: High Speed. Suitable for high RPM motors.

 

Advance 77 Pro opto

Art. No.: JA-77-P-P-O
Advance 77 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 90 Pro opto

Art. No.: JA-90-P-P-O
Advance 90 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance Pro ProgCard

Art. No.: JA-PPPC
Advance Pro ProgCard
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as well as for adjustments of the Advance Pro controller (on the side of the programming card you will find the inscription Advance ProgCard Pro).

HiCOPTER 30A opto

Art. No.: J-HIC-30-O
HiCOPTER 30A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 40A opto

Art. No.: J-HIC-40-O
HiCOPTER 40A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 70A opto

Art. No.: J-HIC-70-O
HiCOPTER 70A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 77A opto

Art. No.: J-HIC-77-O
HiCOPTER 77A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 90A opto

Art. No.: J-HIC-90-O
HiCOPTER 90A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

MEZON 115 opto (RPM)

Art. No.: Standard: JM- 115-O, RPM: JM- 115-O-RPM
MEZON 115 opto (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.

MEZON 120 (RPM)

Art. No.: Standard: JM-120, RPM: JM-120-RPM
MEZON 120 (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 120 lite

Art. No.: JM-120-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 130 (RPM)

Art. No.: Standard: JM-130, RPM: JM-130-RPM
MEZON 130 (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 130 lite

Art. No.: JM-130-L
MEZON 130 lite
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 135 opto (RPM)

Art. No.: Standard: JM-135-O, RPM: JM-135-O-RPM
MEZON 135 opto (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.

MEZON 135 opto lite

Art. No.: JM-135-O-L
MEZON 135 opto lite
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.

MEZON 160 (RPM)

Art. No.: Standard: JM-160, RPM: JM-160-RPM
MEZON 160 (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 160 lite

Art. No.: JM-160-L
MEZON 160 lite
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 165 opto (RPM)

Art. No.: Standard: JM-165-O, RPM: JM-165-O-RPM
MEZON 165 opto (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.

MEZON 165 opto lite

Art. No.: JM-165-O-L
MEZON 165 opto lite
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.

MEZON 40 PRO LMR

Art. No.: JMP-040-LMR
MEZON 40 PRO LMR

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.

LMR (Limited Motor Run) - the controller is especially designed for glider models. The continuous motor run is limited to a few seconds.

MEZON 50 PRO

Art. No.: JMP-050
MEZON 50 PRO

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.

 

MEZON 55 PRO opto

Art. No.: JMP-055-O
MEZON 55 PRO opto

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come an optocoupler, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.



MEZON 70 PRO LMR

Art. No.: JMP-070-LMR
MEZON 70 PRO LMR

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.

LMR (Limited Motor Run) - the controller is especially designed for glider models. The continuous motor run is limited to a few seconds.

MEZON 75 opto (RPM)

Art. No.: Standard: JM-075-O, RPM: JM-075-O-RPM
MEZON 75 opto (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.

MEZON 80 PRO

Art. No.: JMP-080
MEZON 80 PRO

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.



MEZON 85 PRO opto

Art. No.: JMP-085-O
MEZON 85 PRO opto

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come an optocoupler, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.



MEZON 90 (RPM)

Art. No.: Standard: JM-090, RPM: JM-090-RPM
MEZON 90 (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 90 lite

Art. No.: JM-090-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

MEZON 95 opto (RPM)

Art. No.: Standard: JM-095-O, RPM: JM-095-O-RPM
MEZON 95 opto (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESC´s does not contain any BEC circuit.

MEZON 95 opto lite

Art. No.: JM- 095-O-L
MEZON 95 opto lite
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESC´s does not contain any BEC circuit.

SPIN Pro 100

Art. No.: JSP-100
SPIN Pro 100

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 125 opto

Art. No.: JSP-125-O
SPIN Pro 125 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 160

Art. No.: JSP-160
SPIN Pro 160

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 200 opto

Art. No.: JSP-200-O
SPIN Pro 200 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 300 opto

Art. No.: JSP-300-O
SPIN Pro 300 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 33

Art. No.: JSP-33
SPIN Pro 33

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 44

Art. No.: JSP-44
SPIN Pro 44

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 55

Art. No.: JSP-55
SPIN Pro 55

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 66

Art. No.: JSP-66
SPIN Pro 66

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

 

SPIN Pro 66 opto

Art. No.: JSP-66-O
SPIN Pro 66 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 75 opto

Art. No.: JSP-75-O
SPIN Pro 75 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 77 opto

Art. No.: JSP-77-O
SPIN Pro 77 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 80

Art. No.: JSP-80
SPIN Pro 80

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 99 opto

Art. No.: JSP-99-O
SPIN Pro 99 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com