rss
RSS
csende
Search
News
Transmitter update 5.03

You can download and install the latest version 5.03 for your transmitter via JETI Studio:

- Redesigned logical switches.
- Various small fixes.

Transmitter update is here
Image
You can download and install the latest version 5.02 for your transmitter via JETI Studio:
 
 
- Integrated help for DS-12 and DC/DS-24.
- Lua Enhancements.
- Automatic checking of controls assignment after model change.
- Revised input selection dialog.
- More features and one small surprise.
Latest sensor updates

MTAG 1.02
- Revo tags support.

MFLOW2 2.02 
- Editable language setting
- Improved flow measurement accuracy

MBAR 2.00, MAlti V2.01, MVario2 V2.01 
- Editable language setting
- EX Bus improvements

Speed Controllers

 img

Electronic Speed Controllers

Several product lines of electronic speed controllers for versatile use in model hobby. Available are DC controllers as well as AC synchronous speed controllers. You can select from our solutions for airplane models, helicopters, multicopters and boats.

  

Ordering type
Show

Advance Pro ProgCard

Art. No.: JA-PPPC
Advance Pro ProgCard
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as well as for adjustments of the Advance Pro controller (on the side of the programming card you will find the inscription Advance ProgCard Pro).

JES 006

Art. No.: JJ-006
JES 006
JES 006 is the smallest DC speed controller suitable for engines of the 300 series or smaller. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

JES 020 plus

Art. No.: JJ-020
JES 020 plus
JES 020 is a DC speed controller suitable for engines of 400, 480 series or 400 with transmission. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

JES 045 plus

Art. No.: JJ-045
JES 045 plus
JES 045 is DC speed controller suitable for powerful SMCO engines. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

SPIN Pro 33

Art. No.: JSP-33
SPIN Pro 33

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 44

Art. No.: JSP-44
SPIN Pro 44

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 55

Art. No.: JSP-55
SPIN Pro 55

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 66

Art. No.: JSP-66
SPIN Pro 66

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

 

SPIN Pro 125 opto

Art. No.: JSP-125-O
SPIN Pro 125 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 200 opto

Art. No.: JSP-200-O
SPIN Pro 200 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 300 opto

Art. No.: JSP-300-O
SPIN Pro 300 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 66 opto

Art. No.: JSP-66-O
SPIN Pro 66 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 75 opto

Art. No.: JSP-75-O
SPIN Pro 75 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 77 opto

Art. No.: JSP-77-O
SPIN Pro 77 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN Pro 99 opto

Art. No.: JSP-99-O
SPIN Pro 99 opto

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

Advance 40 Pro opto

Art. No.: JA-40-P-P-O
Advance 40 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 70 Pro opto

Art. No.: JA-70-P-P-O
Advance 70 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 90 Pro opto

Art. No.: JA-90-P-P-O
Advance 90 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 77 Pro opto

Art. No.: JA-77-P-P-O
Advance 77 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 12 Pro

Art. No.: JA-12-P-P
Advance 12 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com