rss
RSS
csende
Search
News
The EN 300 328 v1.8.2 standard

In answer to our customers´ inquiries we would like to respond to the fact that the two-year transitional period of the standards relating to electromagnetic compatibility at a frequency of 2.4 GHz is terminating.

The EN 300 328 v1.7.1 standard is valid only until the end of 2014 and since 1. 1. 2015 it will be fully replaced by the EN 300 328 v1.8.2 standard.

New products in our catalogue
Image

New products from our catalogue should arrive at the market during the following days. These products have passed  careful development and testing:

Main Switch:
An electronic switch for the power battery inside the model.

Duplex R7 nano:
The smallest Duplex receiver with the weight of 1g.

Advance 10 Pro:
A lightweight controller without BEC for indoor models.

MSPEED 450:
An airspeed sensor up to 450km/h.

MAX BEC 2D Plus:
Voltage regulator with the support of RC Switch.

EnLink 2RS Plus:
An intelligent signal merger for servos and PPM.

Congratulation to Henning Wessels
Image
Henning Wessels won the first German F3A DMFV competion. He uses the JETI DC-16 in combination with the Mezon 95 speed controller. This combination gives a sure feeling for flying the airplane. All data from the Hacker Q80 are accessible for online and offline analysis - rpm, amps, temperatur etc.

HiCOPTER 30A opto

Art. No.: 
J-HIC-30-O
EAN: 8595245900595
HiCOPTER 30A opto
Weight [g] 35
Dimensions [mm] 65 x 26 x 9
Sustained current [A] 30
Telemetry No
Operational temperature [°C] -20 ... 85
Supply Voltage [V] 5 ... 25,2
Batteries NiXX 6 ... 16
Batteries LiXX 2 ... 6
Batteries LiFe 2 ... 7

Files for download

Manuals - HiCOPTER

HiCOPTER Manual CZ - Czech User Manual
HiCOPTER Manual EN - English User Manual
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.
HiCOPTER speed controllers have control signal galvanically (optically) separated from flight battery. HiCOPTER speed controllers do not allow setting any paramaters. Brakes of the controllers are generally switched off, cut-off voltage is at the lowest possible level (depending on a type) and the timing of motor is set by the speed controller automatically. Potential change in the direction of rotation can be done by exchange of any two phase cables.
Partners
e-flight Esprit Hacker Hepf

Hobbytoys Topmodel.fr
Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com