- New Products
- Duplex 2.4 EX
- Speed Controllers
- Central Box
- FM Receivers
- Duplex Clothes
- Discontinued products
In answer to our customers´ inquiries we would like to respond to the fact that the two-year transitional period of the standards relating to electromagnetic compatibility at a frequency of 2.4 GHz is terminating.
The EN 300 328 v1.7.1 standard is valid only until the end of 2014 and since 1. 1. 2015 it will be fully replaced by the EN 300 328 v1.8.1 standard.
New products from our catalogue should arrive at the market during the following days. These products have passed careful development and testing:
An electronic switch for the power battery inside the model.
Duplex R7 nano:
The smallest Duplex receiver with the weight of 1g.
Advance 10 Pro:
A lightweight controller without BEC for indoor models.
An airspeed sensor up to 450km/h.
MAX BEC 2D Plus:
Voltage regulator with the support of RC Switch.
EnLink 2RS Plus:
An intelligent signal merger for servos and PPM.
Duplex R6 EPC EX
|Dimensions [mm]||45 x 24 x 12,5|
|Number of channels||6|
|Operational temperature [°C]||-10 ... 85|
|Compatible protocols||DUPLEX 2.4GHz EX, EX Bus|
|Antenna Length [mm]||2 x 100|
|Supply Voltage [V]||3,2 - 8,4|
|Average Current [mA]||40|
|Satellite receiver support||No|
|Output Power [dBm]||15|
|Receiver Sensitivity [dBm]||-106|
Files for download
Manuals - Duplex EX
Update - Receivers
Declaration of Conformity: R6
The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.
An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.
DUPLEX System EX is fully compatible with the previous version of the DUPLEX.