rss
RSS
csende
Search
News
GOLD Edition
Image
JETI model celebrated 25th anniversary this year and released Limited Edition of DC-24 and DS-24.
MEZON PRO now available
Image
 

The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.

MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions. 

Available products

REX V1.12 & REX Assist V1.10
Image
 

Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:

Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.

 

Duplex REX V1.12
With EX Bus backup and signal forwarding.

Download here

All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).

 

Download JETI Studio

 

 

Discontinued products

Ordering type
Show

Advance 08 Pro

Art. No.: JA-08-P-P
Advance 08 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 18 Pro

Art. No.: JA-18-P-P
Advance 18 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 18 Pro SB

Art. No.: JA-18-P-P-SB
Advance 18 Pro SB

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

Switching BEC.

 

Advance 30 Pro

Art. No.: JA-30-P-P
Advance 30 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 40 Pro

Art. No.: JA-40-P-P
Advance 40 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 70 Pro

Art. No.: JA-70-P-P
Advance 70 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Duplex R10 EX

Art. No.: JDEX-R10
Duplex R10 EX

10 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions and contains a separate battery plug.

Additional features:

  • PPM input (Sat1)
  • PPM input or output (Sat2)

 

Duplex R12 EPC EX

Art. No.: JDEX-R12EPC
Duplex R12 EPC EX

12 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions and contains a separate battery power connector.

Additional features:

  • PPM input (Sat1)
  • PPM input or output (Sat2)

Duplex R3L EX

Art. No.: JDEX-R3L
Duplex R3L EX
3 channel full-range receiver compatible with JETI EX & EX Bus protocols. This receiver is designed for operation in small and medium models. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

Duplex R4 EX

Art. No.: JDEX-R4
Duplex R4 EX

4 channel reduced-range receiver compatible with JETI EX & EX Bus protocols. This receiver is designed for operation in small models, such as indoor airplanes, parkflyers etc. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

 

Duplex R4Car EX

Art. No.: JDEX-R4C
Duplex R4Car EX
Miniature 4 channel reduced-range receiver compatible with JETI EX & EX Bus protocols. This receiver is designed for operation in model cars, boats etc. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

Duplex R4Car mini EX

Art. No.: JDEX-R4Cm
Duplex R4Car mini EX
Miniature 4 channel reduced-range receiver with internal antenna and compatible with JETI EX & EX Bus protocols. This receiver is designed for operation in model cars, boats etc. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

Duplex R5 EX

Art. No.:
Duplex R5 EX
5 channel reduced-range receiver compatible with JETI EX & EX Bus protocols. This receiver is designed for operation in small models, such as indoor airplanes, parkflyers etc. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

Duplex R5 indoor EX

Art. No.:
Duplex R5 indoor EX

5 channel reduced-range receiver compatible with JETI EX & EX Bus protocols. This receiver is designed for operation in small models, such as indoor airplanes, parkflyers etc. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors. 

Reduced antenna length

Duplex R6 A40 EX

Art. No.: JDEX-R6A40
Duplex R6 A40 EX

6 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors. 

Antenna length: 40cm

Duplex R6 EPC A40 EX

Art. No.: JDEX-R6EPCA40
Duplex R6 EPC A40 EX

6 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors or by the external MPX connector. 

Antenna length: 40cm

Duplex R6 EPC EX

Art. No.: JDEX-R6EPC
Duplex R6 EPC EX
6 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors or by the external MPX connector.

Duplex R6 EX

Art. No.: JDEX-R6
Duplex R6 EX
6 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

Duplex R6F indoor EX

Art. No.: JDEX-R6Fi
Duplex R6F indoor EX
The lightest DUPLEX EX 2.4 GHz receiver weighs only 3 g. It is designed for indoor operation with small models. The receiver contains Micro JST connectors for servos, one JR connector for motor and one JR connector for telemetry. On the JR connector, the channel No. 3 is present (Futaba compatibility). Power supply can be provided by any of the servo connectors.

Duplex R6G indoor EX

Art. No.: JDEX-R6Gi
Duplex R6G indoor EX
The lightest DUPLEX EX 2.4 GHz receiver weighs only 3g. It is designed for indoor operation with small models. Receiver contains Micro JST connectors for servos, one JR connector for motor and one JR connector for telemetry. On the JR connector, the channel No. 1 is present (compatibility with Graupner). Power supply can be provided by any of the servo connectors.

Duplex R7 EX

Art. No.: JDEX-R7
Duplex R7 EX
Receiver DUPLEX R7 EX combines many servo outputs together with small dimensions. R7 EX is designed for easy use in small models. The receiver incorporates two 100mm antennas, JR servo-connectors, and single JR connector for telemetry. Power supply can be provided by any of the servo JR connectors.

Duplex R7 indoor EX

Art. No.: JDEX-R7i
Duplex R7 indoor EX
Receiver DUPLEX R7 indoor combines many servo outputs together with small dimensions. R7 indoor is designed for easy use in small models. The receiver incorporates two 45mm antennas, JR servo-connectors, and a single JR connector for telemetry. Power supply can be provided by any of the servo JR connectors.

Duplex R8 A40 EX

Art. No.: JDEX-R8A40
Duplex R8 A40 EX

8 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors. 

Antenna length: 40cm

Duplex R8 EPC A40 EX

Art. No.: JDEX-R8EPCA40
Duplex R8 EPC A40 EX

8 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors or by the external MPX connector. 

Antenna length: 40cm

Duplex R8 EPC EX

Art. No.: JDEX-R8EPC
Duplex R8 EPC EX

8 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors or by the external MPX connector. 

Duplex R8 EX

Art. No.: JDEX-R8
Duplex R8 EX
8 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

Duplex TA EX

Art. No.: JDEX-TA
Duplex TA EX
The DUPLEX TA module is designated for installation into the Aurora 9 transmitter. The TA module is delivered without antenna and case. For this purpose take advantage of the original antenna and case of the Hitec module which have been delivered with the transmitter.

Duplex TF EX

Art. No.: JDEX-TF
Duplex TF EX

DUPLEX TF EX modules are assigned to transmitters with exchangeable HF plug-in modules. TF modules are compatible with corresponding exchangeable modules of Futaba and Hitec transmitters.

Duplex TG2 EX

Art. No.: JDEX-TG
Duplex TG2 EX

DUPLEX TG2 EX modules are assigned to transmitters with exchangeable HF plug-in modules. TG modules are compatible with corresponding exchangeable modules of Graupner and JR transmitters.

 

 

Duplex TGinternal EX

Art. No.: JDEX-TGi
Duplex TGinternal EX
DUPLEX TGinternal EX modules are assigned to transmitters with exchangeable HF plug-in modules. TGi modules are compatible with corresponding exchangeable modules of Graupner and JR transmitters.

Duplex TGinternal2 EX

Art. No.: JDEX-TGi2
Duplex TGinternal2 EX
DUPLEX TGinternal2 EX modules are assigned to transmitters with exchangeable HF plug-in modules. TGi modules are compatible with corresponding exchangeable modules of Graupner and JR transmitters.

Duplex TGs EX

Art. No.: JDEX-TGs
Duplex TGs EX
DUPLEX TGs EX modules are assigned to transmitters with exchangeable HF plug-in modules. TGs modules are compatible with corresponding exchangeable modules of Graupner transmitters.

Duplex TMe EX

Art. No.: JDEX-TMe
Duplex TMe EX
DUPLEX TMe EX modules are assigned to transmitters Multiplex EVO 7, 9, and 12. Duplex module non-functional with firmware 3.30.

Duplex TMp EX

Art. No.: JDEX-TMp
Duplex TMp EX
DUPLEX TMp EX modules are assigned to transmitters Multiplex Profi 3000 and 4000.

ECO 08

Art. No.: JE-08
ECO 08

Universal speed controllers optimalized for all types of brushless engines. They enable using all types of batteries without threat  of damage.

 

The ECO line of speed controllers is developed mainly for beginners and for general use. The settings can be simply programmed using jumpers.

ECO 12

Art. No.: JE-12
ECO 12

Universal speed controllers optimalized for all types of brushless engines. They enable using all types of batteries without threat  of damage.

 

The ECO line of speed controllers is developed mainly for beginners and for general use. The settings can be simply programmed using jumpers.

ECO 18

Art. No.: JE-18
ECO 18

Universal speed controllers optimalized for all types of brushless engines. They enable using all types of batteries without threat  of damage.

 

The ECO line of speed controllers is developed mainly for beginners and for general use. The settings can be simply programmed using jumpers.

ECO 25

Art. No.: JE-25
ECO 25

Universal speed controllers optimalized for all types of brushless engines. They enable using all types of batteries without threat  of damage.

 

The ECO line of speed controllers is developed mainly for beginners and for general use. The settings can be simply programmed using jumpers.

EnLink 2RS

Art. No.: J-Enlink-duo
EnLink 2RS

EnLink 2RS is a device for increasing safety and reliability of radio controled models to the highest level. Parallel connection of systems that are detached maximally leads to the significant increase in reliability. EnLink2RS is constructed especially for installing to systems with parallel sorting of two receivers in the model.

JES 012 plus

Art. No.: JJ-012
JES 012 plus
JES 012 is a DC speed controller suitable for engines of 370, 400 series. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

JES 030 plus

Art. No.: JJ-030
JES 030 plus
JES 030 is a DC speed controller suitable for engines of 600, 700 series. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

MAX BEC 2D EX

Art. No.: J-MB2-D
MAX BEC 2D EX
Manufactured according to very high European standards, the JETI Max BEC-2D EX is the latest dual input, linear voltage regulator from JETI.
The Max BEC 2D EX includes a magnetic switch, so there is no mechanical wear-and-tear from switching the unit on and off.

MFlow G EX

Art. No.: JEX-MFG
MFlow G EX
The MFlow is a telemetry sensor that measures the flow of the pumped fuel and calculates its amount in the tank. There are two versions of the sensor available. The MFlow-Gasoline is a variant for the models powered by glow or gasoline motors.

MFlow T EX

Art. No.: JEX-MFT
MFlow T EX
The MFlow is a telemetry sensor that measures the flow of the pumped fuel and calculates its amount in the tank. There are two versions of the sensor available. The MFlow-Turbine is a variant designed for the models powered by a jet engine, the MFlow-Gasoline is a variant for the models powered by glow or gasoline motors.

MVario EX

Art. No.:
MVario EX
Module MVario EX is used for measuring the size of climb, descent, and the relative height. The measurement provides a sensitive sensor of barometric pressure. Range of the sensor is a 100 - 1100 mBar. Module MVario records the maximum height, maximum climb and descent of the model.

Optic 8

Art. No.: J-Optic8
Optic 8

OPTIC 8 provides absolute isolation of the RC receiver from other electrical equipment in the model. The OPTIC 8 prevents unwanted signals moving along conductors from servos, speed controllers, and other devices connected to the on–board electrical system.

REX 5 MPD

Art. No.: JR-5MPD-40
REX 5 MPD

Microprocessor Pulse Decoding

REX MPD receivers are designed to receive FM signals in the 27, 35, 35B, 36, 40, 41 and 72 MHz bands.

Rex 4 MPD and Rex 5 MPD recievers are small and lightweight, and suitable for use in small and medium sized model aircraft. Rex 7 MPD receivers can be used in larger models. Futaba, Graupner/JR and Hitec plugs are all suitable for connecting the receiver battery and servos to Jeti Rex MPD receivers.

REX 5 plus

Art. No.: JR-5-40
REX 5 plus
Standard receivers are designed for reception of FM signals in the 27, 35, 35B, 40 MHz radio bands. Due to small size and low
weight, the receivers suit very well small model airplanes with wingspans up to 1500 mm and maximum weights to 1500 g. Suitable types of servo connectors are Futaba, Graupner or Hitec.

SPIN Pro 11

Art. No.: JSP-11
SPIN Pro 11

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

Tray PCD-2 Carbon design for DC-16

Art. No.: JMS-DC-T
Tray PCD-2 Carbon design for DC-16
Tray PCD-2 Carbon design for DC-16
Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com