rss
RSS
csende
Search
News
MEZON PRO now available
Image
 

The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.

MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions. 

Available products

REX V1.12 & REX Assist V1.10
Image
 

Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:

Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.

 

Duplex REX V1.12
With EX Bus backup and signal forwarding.

Download here

All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).

 

Download JETI Studio

 

 

Big March Update is here
Image
 

Lots of new features have been included in the latest updates for transmitters, receivers and JETI Studio PC software:

JETI Studio V1.1.0
It comes with new Transmitter wizard, Lua apps manager and automatic updates of the transmitters.

Download JETI Studio

DC/DS Firmware update V4.27

Update your transmitter to the latest version directly from JETI Studio. New transmitter features:
- DITEX telemetry support
- Updated vario settings
- New voice announcements...

 

Duplex REX V1.10
With DITEX telemetry support. All updates can be handled easily by JETI Studio.

DITEX: Telemetry Update Process

 

 

RCDroidBox

Art. No.: 
JEX-MBT-JAT
EAN: 8595245909970
RCDroidBox
Weight [g] 15
Dimensions [mm] 38 x 20 x 7
Operational temperature [°C] -15 ... 50
Supply Voltage [V] 4 ... 15
Average Current [mA] 20

Files for download

Manuals - RCDroidbox

RCDroidBox allows real-time monitoring and recording of telemetry data transferred using JETI Duplex or Duplex EX protocol. The system consists of both hardware and a software part. The hardware is the actual RCDroidBox Bluetooth adapter and the software is an application running on a device with the Android operating system, such as cell phone or tablet.

The application is available free of charge on Google Play - JATAYA - RCDroidBox. For active use the RCDroidBox has to be connected to a battery 4V-15V with the correct polarity and to the Ext. connector of the RC transmitter or transmitter module.

You can order the RCDroidBox device through one of our dealers in your region.

 

For the whole system to function properly both your RC Transmitter and receiver must support JETI Duplex or JETI Duplex EX. The RCDroidBox and the RC transmitter must be connected together using the three-pin Ext. connector. The connector on the transmitter is the one which would otherwise be used for JETIBOX terminal. The correct orientation of the connector is depicted both on RCDroidBox and on the transmitter. The connection is realized using a three-wire cable with a standard servo -connector on both sides. A separate power supply from battery 4V-15V with the correct polarity and voltage needs to be connected to the RCDroidBox battery connector. The final component is the cell phone or tablet running both the operating system Android (2.3.3 or higher) and the RCDroidBox application.

 

Description of RCDroidBox and transmitter connection
To make a successful instalation of the RCDroidBox, it is necessary to carry out following steps:

  • Connect RCDroidBox Ext. connector to the Ext. connector of the transmitter module.
  • Connect a separate battery power 4V-15V to the DroidBox power connector.
  • Mechanically fasten the battery and the RCDroidBox to the transmitter.

For connecting Bluetooth adapter and the transmitter module, 30cm connecting cable is delivered with the porduct. The polarity is indicated both on the side of the RCDroidBox, and on the side of the transmitter module. Select the power battery to your discretion. In the photo below NiMH 600 mAh 1/3 AA battery is used. Such a battery has a reasonable size for fitting to the RC transmitter, and the RCDroidBox will work approximately for 15 hours.

 

img img img

 

 

How to properly orient the RCDroidBox on the transmitter
For mechanical installation on the body of the RC transmitter use double-sided adhesive tape. Orient the device according to the following recommendations:

  • In normal position of the RC transmitter, the RCDroidBox should be directed longer side perpendicular to the ground.
  • The label should be oriented away from the user.
  • Upper two thirds of the RCDroidBox should be located out of the transmitter silhouette.

Following the above guidelines will maximize the effective range of the Bluetooth connection. For transmitters with plastic body it is not necessary to insist on strict compliance with all of the above points. In case you use the transmitter with a metal body, keeping the recommended installation is necessary.

 



Power Supply
The RCDroidBox mus be power supplied from a separate battery. We strongly recommend sticking to the prescribed connection of the RCDroidBox when installing. We believe that the new possibilities brought by the use of the RCDroidBox balance the worries about the additional battery.The RCDroidBox is also fitted with features that ensure user comfort even when running on a separate power supply. This includes the following functions.:

  • Monitoring the power supply
    In the main telemetry display you have a possibility to displaynot only the values of the connected sensors, but also a voltage of the RCDroidBox battery.With this variable it is possible to work in the same way as with other values​​, and therefore you can assign a report alarm or display a value in the text box.
  • LiPo batteries protection
    If powering the RCDroidBox from LiPo batteries, you do not have to worry about their damage.The RCDroidBox displays a warning when the voltage is less than 3.4V per cell. In case the voltage drops below 3.2V, the cell is automatically switched off.
  • Adjustable battery protection
    You can also choose your own level of voltage at which the device will display a warning and personal level for switching off.
  • Power saving mode
    In case the Bluetooth or the telemetry input (Ext.) are not active for more than 20 minutes, the RCDroidBox goes into the sleep mode and minimizes its consumption.

 

img img
img img

 

Links

Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com