The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.
MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions.
Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:
Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.
Duplex REX V1.12
With EX Bus backup and signal forwarding.
All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).
Lots of new features have been included in the latest updates for transmitters, receivers and JETI Studio PC software:
JETI Studio V1.1.0
It comes with new Transmitter wizard, Lua apps manager and automatic updates of the transmitters.
DC/DS Firmware update V4.27
Update your transmitter to the latest version directly from JETI Studio. New transmitter features:
- DITEX telemetry support
- Updated vario settings
- New voice announcements...
Duplex REX V1.10
With DITEX telemetry support. All updates can be handled easily by JETI Studio.
DITEX: Telemetry Update Process
Power Ion Tx 5200
| Weight [g] | 100 |
| Dimensions [mm] | 75 x 37 x 20 |
| Cell type | LiIon |
| Capacity [mAh] | 5200 |
| Rated voltage [V] | 3.6 |
| Max. cell voltage [V] | 4.2 |
| Max. battery voltage [V] | 4.2 |
Files for download
Manuals - Power Ion Tx
The operating time of the DC and DS transmitters is extended up to 15 hours between recharges.
Battery replacement:
- Make sure that the transmitter is turned off.
- Remove the back cover of the transmitter.
- Disconnect the original battery, loosen the Velcro.
- Replace the battery, secure it with the Velcro.
- Connect the battery to the transmitter using the connector.
- Reinstall the back cover of the transmitter.
