rss
RSS
csende
Search
News
Delivery time DS-24 & Assist
We would like to apologize to all of our customers, but due to an
unexpected level of interest in the Jeti DS-24 Radio Systems and the new Jeti Rex Assist Receivers, all of our production capabilities are completely maxed out. At this time we are confirming delivery dates to our distributors for late January 2018.
 
Thank you for your understanding.
JETI Studio & Central Box 400 Updates
Image

JETI Studio V1.0.5 comes with several new functions and additional optitmizations/fixes.

- Import log files from the MGPS EX sensor directly.
- List of available device updates can be easily displayed in the updater dialog.

More information

 

Central Box 400 V1.0.9 now supports additional 3rd satellite on its Ext. input.

Download the update

 

Important notice for DC-24 owners

We strongly recommend to owners of the DC-24 transmitters to update their transmitters with the latest version 4.24. More information can be found in the

Downloads - Firmware update section 

Connectors

Anti Spark connectors are designed to connect power supply and speed controllers of brushless motors. These connectors are fitted with  a circuit for limiting the charging current to the capacitor controller and thus prevent occurance of electric discharge when connected. Longevity of the connector in terms of the number of connections is extremley enlarged by the elimination of electric discharges. Consequently reliability of the connection is also increased.


Anti Spark connectors are also characterized by low contact resistance and mainly by easy use. Two pairs of connectors are enclosed in the packet, one of them has integrated current limitation. Further on there are 8 heat-shrink tubes in black and red colour for any combinations of connectors plugin.


Anti Spark connectors are available in the size of 4mm, 5,5mm, and 8mm.


Maximum current for  types of the connector:

Type of the connector
ø 4mm ø 5,5mm ø 8mm
Continuous current
75A 150A 300A




Soldering of conductors

Solder proper conductors to the connectors, especially regarding the current load. Firstly solder ASC female connector to the devices for current limitations for capacitor charging. Plug in not used male connector just half way into this female connector. This male connector will function for heat dissipation when soldering and thus prevent melting of the tin on the soldered part with the devices.

Solder remaing connectors in usual way. In case the connectors are contaminated by soldering flux (e.g. rosin) during the soldering, clean the connectors sufficiently, e.g. with ethanol.

In the packet of Anti Spark connectors, there are also heat-shrink tubes that are to be slided onto the connectors and shrunk with hot air gun in the place of solder joint of the connector and the conductor.

In case you solder connectors to the power supply, make sure not to connect positive and negative poles of the accumulator.


Warning

The connector contains fragile ceramic components, please handle it with care.

Ordering type
Show

Anti Spark 8mm

Art. No.: JMS-ASC8
Anti Spark 8mm

Anti Spark 5,5mm

Art. No.: JMS-ASC5
Anti Spark 5,5mm

Anti Spark 4,0mm

Art. No.: JMS-ASC4
Anti Spark 4,0mm
Partners
e-flight Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
 

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com