rss
RSS
csende
Search
News
MEZON PRO now available
Image
 

The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.

MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions. 

Available products

REX V1.12 & REX Assist V1.10
Image
 

Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:

Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.

 

Duplex REX V1.12
With EX Bus backup and signal forwarding.

Download here

All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).

 

Download JETI Studio

 

 

Big March Update is here
Image
 

Lots of new features have been included in the latest updates for transmitters, receivers and JETI Studio PC software:

JETI Studio V1.1.0
It comes with new Transmitter wizard, Lua apps manager and automatic updates of the transmitters.

Download JETI Studio

DC/DS Firmware update V4.27

Update your transmitter to the latest version directly from JETI Studio. New transmitter features:
- DITEX telemetry support
- Updated vario settings
- New voice announcements...

 

Duplex REX V1.10
With DITEX telemetry support. All updates can be handled easily by JETI Studio.

DITEX: Telemetry Update Process

 

 

SBEC 40

Art. No.: 
J-SBEC-40
EAN: 8595245909826
SBEC 40
Weight [g] 100
Dimensions [mm] 80 x 36 x 25
Sustained current [A] 18 (3S LiXXX)
Telemetry No
Operational temperature [°C] -20 ... 85
Recommended input voltage [V] 8 ... 51
Output voltage [V] 5.0 / 5.5 / 6.0 / 7.0 / 8.0
Idle current [µA] 85 (10S LiXXX)
Number of battery inputs 1
Input voltage max. [V] 51
Peak current (max 5s) [A] 40

Files for download

Manuals - SBEC 40

SBEC 40 Manual CZ - Czech User Manual
SBEC 40 Manual DE - German User Manual
SBEC 40 Manual EN - English User Manual

The switching voltage regulator SBEC is supposed to function as a current supply for receivers and servos. It enables to use a wide range of input voltages from 3S up to 12S Li-XX cells. Setup of the output voltage between 5 and 8V is accomplished by a shorting plug jumper. This implies that the SBEC is also prepared for use with new „higher“ voltage servos. The SBEC is suitable for medium and larger model due to its maximum current of 40A.

The output voltage is adjusted with the aid of a shorting plug (jumper) in steps of  5.0V, 5.5V, 6.0V, 7.0V and 8.0V. An important condition of keeping correct output voltage in connection with the jumper position is a sufficiently high supply voltage. The supply voltage of the battery must by all means be higher than the required output voltage. We recommend a minimum difference of at least 2V above the output voltage. Otherwise the output voltage would decrease under load conditions. The switched-on condition of the regulator and the information about the presence of voltage at its output are signaled by a shining green LED.

 

img

 

Table showing dependence of sustained current loads on input voltages:

Number of Lixx Cells

3

4

5

6

7

8

9

10

11

12

Sustained Output-Current* [A]

18

17.5

17

16.5

16

15.5

15

14.5

14

13.5

 

* Sustained current values are valid only for operating conditions with sufficient cooling airflow

Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com