rss
RSS
csende
Search
News
MEZON PRO now available
Image
 

The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.

MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions. 

Available products

REX V1.12 & REX Assist V1.10
Image
 

Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:

Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.

 

Duplex REX V1.12
With EX Bus backup and signal forwarding.

Download here

All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).

 

Download JETI Studio

 

 

Big March Update is here
Image
 

Lots of new features have been included in the latest updates for transmitters, receivers and JETI Studio PC software:

JETI Studio V1.1.0
It comes with new Transmitter wizard, Lua apps manager and automatic updates of the transmitters.

Download JETI Studio

DC/DS Firmware update V4.27

Update your transmitter to the latest version directly from JETI Studio. New transmitter features:
- DITEX telemetry support
- Updated vario settings
- New voice announcements...

 

Duplex REX V1.10
With DITEX telemetry support. All updates can be handled easily by JETI Studio.

DITEX: Telemetry Update Process

 

 

Accessories

 JETIBOX profi

Accessories

Additional accessories and electronics - available are are voltage stabilizers, electronic switches, LiIon accumulators, JETIBOX programmers and many more.

 

Ordering type
Show

USB Adapter

Art. No.: J-USBA
USB Adapter
The USB Adapter transfers information between a PC and Jeti model products. It is, in fact, an adaptation means between the PC USB interface and the data connector Ext. with appropriate USB support, provided in Jeti model products. All types of equipment marked with the label symbol USBa are prepared for firmware updates. On the internet pages www.jetimodel.com you may find information about actual firmware versions.

Universal Magnetic Switch

Art. No.: JMS-MSW
Universal Magnetic Switch
The Magnetic switch is an electronic switching device designed to be used as a switch for JETI model products. A big advantage of electronic switches in comparison to mechanical switches is that, in general, electronic switches are highly resistant to vibration. Also, virtually an unlimited number of ON and OFF cycles is guaranteed with an electronic switch. Because electronic switches have no mechanically movable elements, contacts etc. to wear out, an extremely long service life is another important feature. Unlike with mechanical switches, electronic switches cannot be unexpectedly or falsely tripped.

Switch EXPANDER SW4

Art. No.: J-ESW4
Switch EXPANDER SW4
The Expander SW4 is an extension for magnetic and RC switches and is designed for switching multiple devices simultaneously. The JETI model company produces a wide range of devices that can be switched by magnetic switch or RC switch. The Expander SW4 allows you to combine the switching duties so that several devices can be controlled using one only element. Furthermore, some outputs are optically isolated to prevent interference. This makes it is possible to isolate control of devices which may be sensitive to electric interference.

SPS 20

Art. No.: J-SPS-20
SPS 20
The DPS 40 (twin electronic switch) and SPS 20 (single electronic switch) are electronic switches mainly meant to switch supply voltages of receivers / servos, regulators, fuel pumps or similar equipment. A big advantage of electronic switches in comparison to mechanical ones is in general their higher reliability as far as vibration resistance is concerned. Another advantage of the electronic switch is given by its practical ability to withstand an unlimited number of switching cycles.

SP 06 opto

Art. No.: J-SP06-O
SP 06 opto
The switch SP 06 opto has been specifically designed for switching purposes of auxiliary functions, such as on board glow plug heating systems and miscellaneous lighting systems etc. in model airplanes, model ships, and model cars. The switched loads can be of ohmic, inductive or capacitive character. The switching moment is signalled by  a LED.

SP 06

Art. No.: J-SP06
SP 06
The switch SP 06 has been specifically designed for switching purposes of auxiliary functions, such as on board glow plug heating systems and miscellaneous lighting systems etc. in model airplanes, model ships and model cars. The switched loads can be of ohmic, inductive or capacitive character. The switching moment is signalled by a LED.

SingleBEC

Art. No.: J-SB
SingleBEC

SingleBEC is a linear regulator to provide power for a standard servo with a maximum input voltage of 6V. The SingleBEC can also be used to provide power for the control units of helicopters or multi-rotor aircraft.  

SBEC 40

Art. No.: J-SBEC-40
SBEC 40

The switching voltage regulator SBEC is supposed to function as a current supply for receivers and servos. It enables to use a wide range of input voltages from 3S up to 12S Li-XX cells. Setup of the output voltage between 5 and 8V is accomplished by a shorting plug jumper. This implies that the SBEC is also prepared for use with new „higher“ voltage servos. The SBEC is suitable for medium and larger model due to its maximum current of 40A.

SBEC 30D EX

Art. No.: J-SBEC-30-D
SBEC 30D EX

The switching voltage regulator SBEC 30D EX is supposed to function as a current supply for receivers and servos. It enables to use a wide range of input voltages from 2S up to 15S Li-XX cells. Setup of the output voltage between 5 and 8.4V is accomplished in the JETI transmitter via EX Bus connection or through JETIBOX. This implies that the SBEC is also prepared for use with new "higher" voltage servos. The SBEC 30D is suitable for medium and larger model due to its maximum current of 30A.

SBEC

Art. No.: J-SBEC
SBEC
The switching voltage regulator SBEC is supposed to act as a current supply for receivers and servos. It makes possible to use a wide range of input voltages from 2S up to 10S Li-XX cells. Setup of the output voltage between 5 and 8V is accomplished by a shorting plug jumper. This implies that the SBEC is also prepared for use with new „higher“ voltage servos. The SBEC is due to its maximum current of 12A suitable for medium and larger models.

RCDroidBox - DC/DS

Art. No.: JEX-MBT-DC-DS
RCDroidBox - DC/DS
RCDroidBox allows real-time monitoring and recording of telemetry data transferred using JETI Duplex or Duplex EX protocol. The system consists of both hardware and a software part. The hardware is the actual RCDroidBox Bluetooth adapter and the software is an application running on a device with the Android operating system, such as cell phone or tablet.

RCDroidBox

Art. No.: JEX-MBT-JAT
RCDroidBox
RCDroidBox allows real-time monitoring and recording of telemetry data transferred using JETI Duplex or Duplex EX protocol. The system consists of both hardware and a software part. The hardware is the actual RCDroidBox Bluetooth adapter and the software is an application running on a device with the Android operating system, such as cell phone or tablet.

Power Ion Tx 5200

Art. No.:
Power Ion Tx 5200
Power-Ion 5200 battery pack is designed to power JETI model transmitters of the DC and DS lines. The battery is equipped with plugs. Charging is done via the transmitter and the adapter that comes with the transmitter.

Power Ion RB 5200

Art. No.:
Power Ion RB 5200

Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.

Power Ion RB 2600

Art. No.:
Power Ion RB 2600

Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.

Power Ion 2600 (Single cell)

Art. No.:
Power Ion 2600 (Single cell)
JETI model supplies packs of 2100 and 2600 mAh accumulators. Selected cells in pack are connected by a soldering process that is considered a basic prerequisite of a longtime stability.

Power Ion 2100 (Single cell)

Art. No.:
Power Ion 2100 (Single cell)
JETI model supplies packs of 2100 and 2600 mAh accumulators. Selected cells in pack are connected by a soldering process that is considered a basic prerequisite of a longtime stability.

MT125 EX: Temperature Sensing Probe

Art. No.: JMS-MT125
MT125 EX: Temperature Sensing Probe
Replacement temperature sensing probe for MT 125.

MAX BEC 2D Plus EX

Art. No.: JEX-MB2-DP
MAX BEC 2D Plus EX

Manufactured according to very high European standards, the MAX BEC 2D plus EX is the latest dual input, linear voltage regulator from JETI. The Max BEC 2D Plus EX includes a magnetic switch, so there is no mechanical wear-and-tear from switching the unit on and off.

The MAX BEC 2D plus EX supports on / off via RC Switch. It can be easily installed.

MAX BEC 2

Art. No.: J-MB2
MAX BEC 2
MAX BEC 2 is designed to power the receiver and servos in the model. MAX BEC 2 is a linear voltage stabilizer with an adjustable output voltage. The output voltage is set using a jumper and in one of four positions: 5.0V, 5.4V, 5.7V or 6.0V. MAX BEC 2 can be powered using NiXX and Li–XX cells. MAX BEC also gives an indication of used capacity of the battery with four LED´s.
Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com