rss
RSS
csende
Search
News
MEZON PRO now available
Image
 

The MEZON PRO controllers are a successor of the previous product line of the Mezon speed controllers. They contain a lot of new features and improvements, such as comfortable configuration via the JETI DC/DS transmitters, proportional brake, bidirectional motor operation, EX Bus configuration etc.

MEZON PRO controllers are available in OPTO, standard (BEC) and LMR versions. 

Available products

REX V1.12 & REX Assist V1.10
Image
 

Lots of new features have been included in the latest updates for standard REX and REX Assist receivers:

Duplex REX Assist V1.10
Comes with a lot of fixes and enhancements. Horizon and Training flight modes have been optimized, introducing 2D flight mode. To see a full list of features and modifications please visit the release notes.

 

Duplex REX V1.12
With EX Bus backup and signal forwarding.

Download here

All updates can be handled easily by JETI Studio. Please download the latest device definitions to your transmitter (simply update the transmitter to V4.28 via JETI Studio, the necessary files will be downloaded automatically).

 

Download JETI Studio

 

 

Big March Update is here
Image
 

Lots of new features have been included in the latest updates for transmitters, receivers and JETI Studio PC software:

JETI Studio V1.1.0
It comes with new Transmitter wizard, Lua apps manager and automatic updates of the transmitters.

Download JETI Studio

DC/DS Firmware update V4.27

Update your transmitter to the latest version directly from JETI Studio. New transmitter features:
- DITEX telemetry support
- Updated vario settings
- New voice announcements...

 

Duplex REX V1.10
With DITEX telemetry support. All updates can be handled easily by JETI Studio.

DITEX: Telemetry Update Process

 

 

Accessories

 JETIBOX profi

Accessories

Additional accessories and electronics - available are are voltage stabilizers, electronic switches, LiIon accumulators, JETIBOX programmers and many more.

 

Ordering type
Show

AddCAP 10AS

Art. No.: J-AC-10AS
AddCAP 10AS

The AddCAP 10AS is an add-on capacitor unit that helps to insure constant voltage for your servos and receiver in large pulse current consumption power systems. 

AddCAP 1640

Art. No.: J-AC-1640
AddCAP 1640

AddCAP 1640 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your battery to your ESC need to be lengthened more than 20cm (8 inches). 

 

AddCAP 820

Art. No.: J-AC-820
AddCAP 820

AddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your battery to your ESC need to be lengthened more than 20cm (8 inches). 

 

Advance Pro ProgCard

Art. No.: JA-PPPC
Advance Pro ProgCard
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as well as for adjustments of the Advance Pro controller (on the side of the programming card you will find the inscription Advance ProgCard Pro).

Antenna 2.4 - 2.5 GHz, 2 dBi

Art. No.: JMS-A2400
Antenna 2.4 - 2.5 GHz, 2 dBi
Replacement antenna for DUPLEX 2.4 GHz transmitter module.

Antenna extension cable for TF/TG/TGi modules

Art. No.: JMS-PA
Antenna extension cable for TF/TG/TGi modules
Antenna extension cable for TF/TG/TGi modules

Anti Spark 4,0mm

Art. No.: JMS-ASC4
Anti Spark 4,0mm

Anti Spark 5,5mm

Art. No.: JMS-ASC5
Anti Spark 5,5mm

Anti Spark 8mm

Art. No.: JMS-ASC8
Anti Spark 8mm

Assembly Kit FFC 16 (for Futaba FC-16 and FC-18 transmitters)

Art. No.: JMS-F16
Assembly kit for installation DUPLEX TU transmit module into Futaba FC-16 and FC-18 transmitters.

Assembly Kit G10/12 (for Graupner MC 10/12 transmitters)

Art. No.: JMS-G10/12
Assembly Kit G10/12 (for Graupner MC 10/12 transmitters)
Assembly kit for installation DUPLEX TU transmit module into Graupner MC-10 and MC-12 transmitters.

Assembly Kit G19 (for Graupner MC-19 transmitters)

Art. No.: JMS-G19
Assembly Kit G19 (for Graupner MC-19 transmitters)
Assembly kit for installation DUPLEX TU transmit module into Graupner MC-19 transmitter.

Assembly kit GMC 15/16-20

Art. No.:
Assembly kit GMC 15/16-20
Assembly kit for installation DUPLEX TU2 transmit module into Graupner MC-14, MC-15, MC-16, MC16-20 transmitters.

Assembly kit GMX 16 (for Graupner MX 12s/16s transmitters)

Art. No.: JMS-G16
Assembly kit GMX 16 (for Graupner MX 12s/16s  transmitters)
Assembly kit for installation DUPLEX TU transmit module into Graupner MX-16s and MX-12s transmitters.

Assembly kit HE7

Art. No.: JMS-HE7
Assembly kit HE7
Mounting kit for transmitters Hitec Eclipse 7

Assembly kit JB profi

Art. No.: JMS-JBP
Assembly kit JB profi
Assembly kit is designed for mechanical and electrical connection between JETIBOX profi and RC transmitter.

Connection
red: plus
black: minus
yellow: PPM

Assembly kit ME

Art. No.: JMS-ME
Assembly kit ME
Mounting kit for the transmitter DUPLEX TU MULTIPLEX EVO.

Assembly kit SWTU2

Art. No.: JMS-SWTU2
Assembly kit SWTU2
Mounting kit for the transmission module Duplex TU2 for switching between the two modules.

Assembly kit VOICE-1

Art. No.: JMS-VOICE-1
Assembly kit VOICE-1
Mounting kit for connecting an external siren and headphone output of the DUPLEX TU2.

Assembly kit: Cable for the TU-2 module

Art. No.: JMS-KTU
Assembly kit: Cable for the TU-2 module
The cable supplied with the  Duplex TU-2 EX  transmitter module. It is used to connect the Duplex TU-2  EX transmitter module and Graupner transmitters (eg. MC-22). Cable length 200 mm.

DPS 40

Art. No.: J-DPS-40
DPS 40

The DPS 40 (twin electronic switch) and SPS 20 (single electronic switch) are electronic switches mainly meant to switch supply voltages of receivers / servos, regulators, fuel pumps or similar equipment. A big advantage of electronic switches in comparison to mechanical ones is in general their higher reliability as far as vibration resistance is concerned. Another advantage of the electronic switch is given by its practical ability to withstand an unlimited number of switching cycles.

DSM 10

Art. No.: J-DSM-10
DSM 10

DSM 10 is an electronic switch for switching of two receiver batteries which are connected to one receiver. The product also includes a receiver current supply switch. Batteries that are connected to the inputs of the DSM 10 are permanently measured and connected with the aid of a hysteresis comparator either both to the output, or one of both batteries with the higher voltage only.

The DSM 10 exit consists of a MPX connector which can be used for direct connection of the exit to the receiver. The MPX connector is a fixed part of Duplex receivers with the label EPC (External Power Connector), receivers R14 and R18.

DSM ESC

Art. No.: J-DSM-ESC
DSM ESC
DSM ESC is an electronic switch for powering receiver and servos. It combines the voltage output from either two electronic speed controllers (ESC), each with a BEC circuit or an ESC in combination with a receiver battery. The throttle signal from the receiver is supplied to both controllers simultaneously. The DSM ESC also includes a receiver power supply switch.

EnLink 2RS Plus

Art. No.: J-ENLINK-P-DUO
EnLink 2RS Plus

EnLink 2RS plus is a device for increasing safety and reliability of radio controled models to the highest level. Parallel connection of systems that are detached maximally leads to the significant increase in reliability. EnLink 2RS Plus is constructed especially for installing to systems with parallel sorting of two receivers in the model.

EnLink 2RS Plus is capable of merging the servo signals as well a PPM, UDI or EX Bus protocols. 

HiCOPTER 12V3A

Art. No.: J-HIC-12V3A
HiCOPTER 12V3A
The switching voltage regulator HiCOPTER is supposed to act as a current supply for accessories in the XCopters. The switching voltage regulators HiCOPTER 12V make it possible to use wide range of input voltages from 4S up to 12S Li-XX cells.

HiCOPTER 12V8A

Art. No.: J-HIC-12V8A
HiCOPTER 12V8A
The switching voltage regulator HiCOPTER is supposed to act as a current supply for accessories in the XCopters. The switching voltage regulators HiCOPTER 12V make it possible to use wide range of input voltages from 4S up to 12S Li-XX cells.

Increaser MPX male / 3x JR conector

Art. No.: JMS-MPX/3xJR
Increaser MPX male / 3x JR conector
Increaser MPX male / 3x JR conector for MAX BEC 2. Conductor cross section 0.5 mm2.

JETIBOX

Art. No.: J-999
JETIBOX
JETIBOX is a universal communication terminal which can be used with any JETI products that are marked JETIBOX Compatible. JETIBOX Compatible (JBC) products use powerful software to allow easy setup and reading of data using a simple menu driven display on the JETIBOX terminal.

JETIBOX Holder

Art. No.: JMS-HJB
JETIBOX Holder
JETIBOX Holder

JETIBOX mini

Art. No.: J-JBM
JETIBOX mini
The JETIBOX mini is used for data readout and parameter adjustment of hooked up equipment. Due to small size it can be easily mounted to the transmitter and its clearly arranged backlit display enables excellent readability at any weather coditions. Equipment designated by the JETIBOX COMPATIBLE label is JETIBOX mini compatible as well.

JETIBOX profi

Art. No.: J-JBP
JETIBOX profi
The JETIBOX profi is a mobile wireless device, offering maximum comfort to the user while viewing, processing, and storing telemetric data. An integral part of the JETIBOX profi is the system JETI DUPLEX 2.4GHz that can be alternatively operated in one of the two offered wireless modes.

Main Switch 100

Art. No.: J-MSW-100-RCSW,J-MSW-100-MS
Main Switch 100

Main Switch is an electronic switch designed primarily for switching of the main power supply for an RC model. It adds an element of safety when handling the model, without the need to physically disconnect the model´s batteries. A big advantage of electronic switches in comparison to mechanical switches is, in general, their higher reliability as far as vibration resistance is concerned. The Main Switch prevents the connectors from sparking when connecting the batteries, thus it can also replace Anti Spark plugs. 

Main Switch 200

Art. No.: J-MSW-200-RCSW,J-MSW-200-MS
Main Switch 200

Main Switch is an electronic switch designed primarily for switching of the main power supply for an RC model. It adds an element of safety when handling the model, without the need to physically disconnect the model´s batteries. A big advantage of electronic switches in comparison to mechanical switches is, in general, their higher reliability as far as vibration resistance is concerned. The Main Switch prevents the connectors from sparking when connecting the batteries, thus it can also replace Anti Spark plugs. 

MAX BEC

Art. No.: J-MB
MAX BEC
Linear regulator MAX BEC is a sophisticated tool for regulating voltage in models which have a receiver and servos powered by 2 LiXX cells or 5-6 NiXX cells. Servo voltage is constant during the entire flight which results in smooth motion of the servos.

MAX BEC 2

Art. No.: J-MB2
MAX BEC 2
MAX BEC 2 is designed to power the receiver and servos in the model. MAX BEC 2 is a linear voltage stabilizer with an adjustable output voltage. The output voltage is set using a jumper and in one of four positions: 5.0V, 5.4V, 5.7V or 6.0V. MAX BEC 2 can be powered using NiXX and Li–XX cells. MAX BEC also gives an indication of used capacity of the battery with four LED´s.

MAX BEC 2D Plus EX

Art. No.: JEX-MB2-DP
MAX BEC 2D Plus EX

Manufactured according to very high European standards, the MAX BEC 2D plus EX is the latest dual input, linear voltage regulator from JETI. The Max BEC 2D Plus EX includes a magnetic switch, so there is no mechanical wear-and-tear from switching the unit on and off.

The MAX BEC 2D plus EX supports on / off via RC Switch. It can be easily installed.

MT125 EX: Temperature Sensing Probe

Art. No.: JMS-MT125
MT125 EX: Temperature Sensing Probe
Replacement temperature sensing probe for MT 125.

Power Ion 2100 (Single cell)

Art. No.:
Power Ion 2100 (Single cell)
JETI model supplies packs of 2100 and 2600 mAh accumulators. Selected cells in pack are connected by a soldering process that is considered a basic prerequisite of a longtime stability.

Power Ion 2600 (Single cell)

Art. No.:
Power Ion 2600 (Single cell)
JETI model supplies packs of 2100 and 2600 mAh accumulators. Selected cells in pack are connected by a soldering process that is considered a basic prerequisite of a longtime stability.

Power Ion RB 2600

Art. No.:
Power Ion RB 2600

Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.

Power Ion RB 5200

Art. No.:
Power Ion RB 5200

Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.

Power Ion Tx 5200

Art. No.:
Power Ion Tx 5200
Power-Ion 5200 battery pack is designed to power JETI model transmitters of the DC and DS lines. The battery is equipped with plugs. Charging is done via the transmitter and the adapter that comes with the transmitter.

RCDroidBox

Art. No.: JEX-MBT-JAT
RCDroidBox
RCDroidBox allows real-time monitoring and recording of telemetry data transferred using JETI Duplex or Duplex EX protocol. The system consists of both hardware and a software part. The hardware is the actual RCDroidBox Bluetooth adapter and the software is an application running on a device with the Android operating system, such as cell phone or tablet.

RCDroidBox - DC/DS

Art. No.: JEX-MBT-DC-DS
RCDroidBox - DC/DS
RCDroidBox allows real-time monitoring and recording of telemetry data transferred using JETI Duplex or Duplex EX protocol. The system consists of both hardware and a software part. The hardware is the actual RCDroidBox Bluetooth adapter and the software is an application running on a device with the Android operating system, such as cell phone or tablet.

SBEC

Art. No.: J-SBEC
SBEC
The switching voltage regulator SBEC is supposed to act as a current supply for receivers and servos. It makes possible to use a wide range of input voltages from 2S up to 10S Li-XX cells. Setup of the output voltage between 5 and 8V is accomplished by a shorting plug jumper. This implies that the SBEC is also prepared for use with new „higher“ voltage servos. The SBEC is due to its maximum current of 12A suitable for medium and larger models.

SBEC 30D EX

Art. No.: J-SBEC-30-D
SBEC 30D EX

The switching voltage regulator SBEC 30D EX is supposed to function as a current supply for receivers and servos. It enables to use a wide range of input voltages from 2S up to 15S Li-XX cells. Setup of the output voltage between 5 and 8.4V is accomplished in the JETI transmitter via EX Bus connection or through JETIBOX. This implies that the SBEC is also prepared for use with new "higher" voltage servos. The SBEC 30D is suitable for medium and larger model due to its maximum current of 30A.

SBEC 40

Art. No.: J-SBEC-40
SBEC 40

The switching voltage regulator SBEC is supposed to function as a current supply for receivers and servos. It enables to use a wide range of input voltages from 3S up to 12S Li-XX cells. Setup of the output voltage between 5 and 8V is accomplished by a shorting plug jumper. This implies that the SBEC is also prepared for use with new „higher“ voltage servos. The SBEC is suitable for medium and larger model due to its maximum current of 40A.

SingleBEC

Art. No.: J-SB
SingleBEC

SingleBEC is a linear regulator to provide power for a standard servo with a maximum input voltage of 6V. The SingleBEC can also be used to provide power for the control units of helicopters or multi-rotor aircraft.  

SP 06

Art. No.: J-SP06
SP 06
The switch SP 06 has been specifically designed for switching purposes of auxiliary functions, such as on board glow plug heating systems and miscellaneous lighting systems etc. in model airplanes, model ships and model cars. The switched loads can be of ohmic, inductive or capacitive character. The switching moment is signalled by a LED.

SP 06 opto

Art. No.: J-SP06-O
SP 06 opto
The switch SP 06 opto has been specifically designed for switching purposes of auxiliary functions, such as on board glow plug heating systems and miscellaneous lighting systems etc. in model airplanes, model ships, and model cars. The switched loads can be of ohmic, inductive or capacitive character. The switching moment is signalled by  a LED.

SPS 20

Art. No.: J-SPS-20
SPS 20
The DPS 40 (twin electronic switch) and SPS 20 (single electronic switch) are electronic switches mainly meant to switch supply voltages of receivers / servos, regulators, fuel pumps or similar equipment. A big advantage of electronic switches in comparison to mechanical ones is in general their higher reliability as far as vibration resistance is concerned. Another advantage of the electronic switch is given by its practical ability to withstand an unlimited number of switching cycles.

Switch EXPANDER SW4

Art. No.: J-ESW4
Switch EXPANDER SW4
The Expander SW4 is an extension for magnetic and RC switches and is designed for switching multiple devices simultaneously. The JETI model company produces a wide range of devices that can be switched by magnetic switch or RC switch. The Expander SW4 allows you to combine the switching duties so that several devices can be controlled using one only element. Furthermore, some outputs are optically isolated to prevent interference. This makes it is possible to isolate control of devices which may be sensitive to electric interference.

Universal Magnetic Switch

Art. No.: JMS-MSW
Universal Magnetic Switch
The Magnetic switch is an electronic switching device designed to be used as a switch for JETI model products. A big advantage of electronic switches in comparison to mechanical switches is that, in general, electronic switches are highly resistant to vibration. Also, virtually an unlimited number of ON and OFF cycles is guaranteed with an electronic switch. Because electronic switches have no mechanically movable elements, contacts etc. to wear out, an extremely long service life is another important feature. Unlike with mechanical switches, electronic switches cannot be unexpectedly or falsely tripped.

USB Adapter

Art. No.: J-USBA
USB Adapter
The USB Adapter transfers information between a PC and Jeti model products. It is, in fact, an adaptation means between the PC USB interface and the data connector Ext. with appropriate USB support, provided in Jeti model products. All types of equipment marked with the label symbol USBa are prepared for firmware updates. On the internet pages www.jetimodel.com you may find information about actual firmware versions.
Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com