rss
RSS
csende
Search
News
Two updates have been released via JETI Studio.
Image

 

 

 

1.    REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).

2.    MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.

Central Box update v1.10
Image
New version of SW v1.10 intended for Central Box 210/220.

-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)

The update can be done by the Jeti Studio.
Transmitter update 5.04
Image
New version SW 5.04 intended for DS-12 and DC-16II transmitters. The update can be done by the new Jeti Studio v1.1.3.
The 900MHz NG (Next Generation) backup module can be enabled (SW 5.04) after the appropriate module activation via the JETI SW shop https://swshop.jetimodel.com.

How to correctly connect a backup receiver to the REX receiver via EX Bus serial line.

How to correctly connect a backup receiver to the REX receiver via EX Bus serial line.
Pair both receivers with the DC/DS transmitter in the Double Path mode (or set the backup receiver to CLONE mode). All REX receivers are equipped with fully adjustable inputs E1 and E2. Select for one of these inputs in the settings  EX Bus input/backup (min. irmware version REX 1.13 and REX Assist 1.12). In the main receiver you can set Fail-Safe for servos (we recommend at least lowering the throttle down). In the backup receiver please disable Fail-Safe function and set up the output to EX Bus mode.
 
For the Rsat2 satellite receivers the EX Bus signal is generated at the Ext. output. On the contrary, the Rsat900 receivers are equipped with fully adjustable E1 and E2 outputs.
 
 
Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com